ergo 1625

ergo 1625 is a pasty, fast curing two-component grade, which is based on modified acrylics. The product bonds various plastics and metals as well as combinations of both of them. Dependent on ambient temperature, the 10:1 mixed adhesive shows an open time of approximately 7 minutes and fixture time already after 15 minutes (at 23°C).

Specifications

CharacteristicsCondition
Product categoryMethacrylate structural adhesives
Coloroffwhite-yellow (after cure)
Mixing ratio10:1 (V:V)
Viscosity [mPas]~100 000 thixotropic (Mix)
Pot life [min]~7
Fixture time [min]~15
Final strength [h]~24
Tensile strength [N/mm2]
(DIN 53504)
~10
Tensile shear strength [N/mm2]
(Alu-Alu; DIN EN 1465)
~16
Tensile shear strength [N/mm2]
(Steel-Steel; DIN EN 1465)
~17
Elongation at break [%]
(Nach DIN 53504)
~160
Temperature range [°C]+10 – +40
Container size
Bulk containers on request
50 ml | 490 ml

Safety data sheet

CountrySwitzerlandGermanyFranceItaly
LanguageGermanEnglishFrenchItalianGermanEnglishFrenchItalian

Technical data sheet

GermanEnglish

Instructions for use

GermanEnglish